TP-Link Deco BE65-5G - Set Up Your Deco for Wi-Fi Router Mode (Part 3); Wait for Decos LED to Pulse Blue; Specify Your Decos Location; Connect Your Deco to the Internet

11
9. Connect your Deco to the internet
Select the internet connection type and enter
the information. If you are not sure, contact
your internet service provider.
8. Specify your Deco's location
Select or custom a location for your Deco.
The location will be used as the name of your
Deco.
7. Wait until Deco's LED pulses blue
Wait until your Deco's LED pulses blue, then
it's ready for setup.