2
Appearance
Each Deco has an LED that changes color according to its status, a WPS button, three 2.5 Gbps WAN/LAN ports, two external antennas port, a SIM
card slot,a USB port, a power slot, and a Reset button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Pulse Yellow:
Deco is resetting.
Solid Yellow:
Deco is starting up.
Pulse Blue:
Deco is ready for setup.
Solid Blue:
Deco is setting up.
Pulse Green:
Deco is upgrading rmware.
Solid Green:
Deco is all set up and connected to
4G/WAN.
Solid White:
Deco is all set up and connected to 5G.
Pulse Red:
The satellite Deco is disconnected
from the main Deco.
Solid Red:
Deco has an issue.
For inserting a Nano SIM card (not included in the package) to Deco.
SIM Card Slot
Press this WPS button, and immediately press the WPS button
on your client device to start the WPS process.
For connecting a USB storage device to Deco.
For connecting Deco to your modem, the Ethernet outlet,
or for other internet services.
For connecting Deco to the power socket via the provided power adapter.
3× 2.5 Gbps WAN/LAN Ports
WPS Button
Power Slot
Press for 1 second and release to reset Deco to factory default settings. The light
changing from pulsing yellow to solid yellow indicated a successful reset.
Reset Button
1× USB Port
5G/4G/3G External SMA-F Antenna Ports
To Next Page
Loading...
