3
Appearance
This smart outdoor plug has two individual smart outlets, each with a control button to turn on or o the plug-in device and a LED to show you the
current status. The System LED changes color according to dierent status. See the explanation below:
Blinking Orange
Resetting.
Blinking Green
Searching for Wi-Fi.
Red
No Wi-Fi connection.
Blinking Orange and Green
Setup mode initiated.
System LED
Orange
Rebooting.
White
Connected to Wi-Fi network successfully.
Smart Outlet x 2
Plug in your device and control it from your smartphone.
Each outlet is independent.
Control Button x 2
Press the control button to turn on or o the corresponding outlet.
Press and hold a control button for 5s to reenable setup mode.
Press and hold a control button for 10s to restore your smart outdoor plug to factory default settings.
LED of Smart Outlet x 2
Lit up when the corresponding smart outlet is on.
To Next Page
Loading...
