TP-Link LiteWave LS1005 User Manual

© 2020 TP-Link
7106508806 REV1.0.1
Note: For simplicity, we will take LS1008 for example throughout this Guide.
Connection
5/8-Port 10/100Mbps Desktop Switch
Installation Guide
LS1005/LS1008
LED Explanation
Link/Act
On:
Running at 10/100Mbps
Flashing: Transmitting/receiving data
O:
No device is linked to the corresponding port
On: Power on
O: Power o
Power
PC
Router
LAN Port WAN Port
Internet
PC
LS1008
Ethernet Ports (1-8)
Power Adapter
Power LEDLink/Act LED

TP-Link LiteWave LS1005 Specifications

General

Switch Type	Unmanaged
Switching Capacity	10 Gbps
Standards and Protocols	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Forwarding Rate	7.44 Mpps
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
MAC Address Table	1K
Weight	0.35 kg (0.77 lb)
External Power Supply	5V DC, 0.6A
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% (non-condensing)

Summary

TP-Link Switch Installation Guide

LED Status Indicators

Explains the status indications for Power and Link/Act LEDs on the TP-Link switch.

Network Connection Setup

Illustrates the physical connections for the switch, router, and PCs.

Switch Troubleshooting FAQs

Power LED Not Lit Troubleshooting

Provides steps to resolve issues when the switch's Power LED is not lit.

Link/Act LED Not Lit Troubleshooting

Offers guidance on resolving problems with the Link/Act LED not indicating connection.

Switch Technical Specifications

General Technical Specifications

Details standards, protocols, data transfer rates, and interface types.

Environmental and Physical Specs

Lists the operating temperature, humidity, and storage conditions for the device.

Device Safety and Compliance

Essential Safety Precautions

Highlights important safety guidelines for handling and using the TP-Link switch.