Need help?Do you have a question about the TP-Link JetStream L2 Lite TL-SG3210 and is the answer not in the manual?
General| Model | TL-SG3210 |
|---|---|
| Category | Switch |
| Type | Managed |
| Switching Capacity | 20Gbps |
| Forwarding Rate | 14.88 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 9KB |
| Certifications | CE, FCC, RoHS |
| Ports | 8 x 10/100/1000Mbps RJ45 ports, 2 x 1G SFP slots |
| Standards and Protocols | IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s |
| VLAN | 4K VLAN IDs |
| Operating Temperature | 0°C~40°C (32°F~104°F) |
| Storage Temperature | -40°C~70°C (-40°F~158°F) |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
Details the core functionalities and benefits of the switch, including resiliency, security, and manageability.
Provides essential tools for managing the switch's configuration, firmware, and reboot/reset functions.
Outlines security measures for remote login, including access control, SSL, and SSH configuration.
Explains the 802.1Q VLAN standard, tagging, port types, and PVID configuration.
Covers global configuration of Spanning Tree Protocol (STP), including parameters and versions.
Explains IGMP Snooping for efficient multicast group management and traffic control.
Explains Differentiated Services (DiffServ) for traffic classification and priority mapping.
Binds IP and MAC addresses to hosts for enhanced network access control and security.
Detects and filters illegal ARP packets to prevent ARP attacks like spoofing.
Implements port-based authentication for network access control using EAP and RADIUS.
Provides tools for diagnosing device issues, including cable testing and loopback tests.
Facilitates network troubleshooting with Ping and Tracert functions to test connectivity.
To Next Page
