TP-Link JetStream L2 Lite TL-SG3210 - Application Example for Cluster Function

Figure 13-13 Cluster Configuration for Member Switch
The following entries are displayed on this screen:
¾ Current Role
Role: Displays the role the current switch plays in the cluster.
¾ Role Change
Individual: Select this option to change the role of the switch to be individual
switch.
z For an individual switch, the following page is displayed.
Figure 13-14 Cluster Configuration for Individual Switch
The following entries are displayed on this screen:
¾ Current Role
Role: Displays the role the current switch plays in the cluster.
¾ Role Change
Candidate: Select this option to change the role of the switch to be candidate
switch.
13.4 Application Example for Cluster Function
¾ Network Requirements
Three switches form cluster, one commander switch (Here take TP-LINK TL-SL5428E as an
example) and two member switches (Here take TP-LINK TL-SG3210 as an example). The
191