TP-Link JetStream L2 Lite TL-SG3210 - Static LAG

Figure 5-7 Detail Information
5.2.2 Static LAG
On this page, you can manually configure the LAG. The LACP feature is disabled for the member
ports of the manually added Static LAG.
Choose the menu Switching→LAG→Static LAG to load the following page.
Figure 5-8 Manually Config
The following entries are displayed on this screen:
¾ LAG Config
Group Number: Select a Group Number for the LAG.
Description: Give a description to the LAG for identification.
36