Figure 13-11 Cluster Summary for Individual Switch
The following entries are displayed on this screen:
¾ Global Config
Cluster: Displays the cluster status (enabled or disabled) of the switch.
Cluster Role: Displays the role the switch plays in the cluster.
13.3.2 Cluster Config
On this page you can configure the status of the cluster the switch belongs to.
Choose the menu Cluster→Cluster→Cluster Config to load the following page.
z For a candidate switch, the following page is displayed.
Figure 13-12 Cluster Configuration for Candidate Switch
The following entries are displayed on this screen:
¾ Current Role
Role: Displays the role the current switch plays in the cluster.
¾ Role Change
Individual: Select this option to change the role of the switch to be individual
switch.
z For a member switch, the following page is displayed.
190
To Next Page
Loading...
