Need help?Do you have a question about the TP-Link TL-SG1008P and is the answer not in the manual?
General| Switch type | Managed |
|---|---|
| Quality of Service (QoS) support | No |
| Power connector | DC-in jack |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Flow control support | Yes |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e |
| Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
| Jumbo frames | 16000 |
| Forwarding rate | 11.904 Mpps |
| MAC address table | 4000 entries |
| Power source | DC/PoE |
| Input current | 1.31 A |
| AC input voltage | 100 - 240 V |
| DC input voltage | 53.5 V |
| AC input frequency | 50/60 Hz |
| Power consumption (max) | 75 W |
| Number of power supply units | 1 |
| Product color | Gray |
| Housing material | Metal |
| Heat dissipation | 225.75 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Total Power over Ethernet (PoE) budget | 64 W |
| Power over Ethernet (PoE) ports quantity | 4 |
| Package type | Box |
| Package depth | 280 mm |
| Package width | 223 mm |
| Package height | 68 mm |
| Package weight | 900 g |
| Cables included | AC |
| Maximum cable length | 100 m |
| Sustainability certificates | CE, Federal Communications Commission (FCC), RoHS |
Weight and Dimensions| Depth | 98 mm |
|---|---|
| Width | 171 mm |
| Height | 27 mm |
Information regarding the CE mark and product classification for domestic environments.
Important warnings regarding water proximity and electrical storms for safe operation.
Details the TL-SG1008P's seamless network connection, Gigabit Ethernet, and PoE capabilities.
Defines terms used in the user guide for TL-SG1008P, ensuring clear communication.
Lists key features and standards compliance of the TL-SG1008P switch.
Step-by-step instructions for physically placing and securing the switch on a desk.
Guidance on connecting power and initial system initialization with LED indicator behavior.
Description of the front panel layout, including LEDs for power, link, speed, and PoE status.
Details the rear panel components, including ports, power input, and PoE status indicators.
To Next Page
