Need help?Do you have a question about the TP-Link TL-SG1008 and is the answer not in the manual?
General| Jumbo frames | 16000 |
|---|---|
| MAC address table | 4000 entries |
| Store-and-forward | Yes |
| Maximum data transfer rate | 1 Gbit/s |
| Supported data transfer rates | 10/100/1000 Mbps |
| 10G support | No |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
| Input frequency | 50 - 60 Hz |
| Dimensions (WxDxH) | 294 x 180 x 44 mm |
| Networking features | Gigabit Ethernet |
| Connectivity technology | Wired |
| Dimensions (W x D x H) (imperial) | 9.8 x 6.2 x 1.7 \ |
| Switch type | Unmanaged |
| Switch layer | - |
| Supported network protocols | CSMA/CD, TCP/IP |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Form factor | 1U |
| Certification | FCC, CE, RoHS |
| Product color | Black |
| Heat dissipation | 14.67 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| Power consumption (typical) | 4.3 W |
| Package type | Box |
| Package depth | 250 mm |
| Package width | 400 mm |
| Package height | 80 mm |
| Package weight | 1700 g |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 294 mm |
| Height | 44 mm |
Important warnings regarding product usage near water or during electrical storms for safety.
Contact the retailer if any contents are damaged or missing for assistance.
Description of the Gigabit Ethernet Switch's performance, features, and benefits for network upgrades.
Lists key features like IEEE standards compliance, auto-negotiation, and plug-and-play functionality.
Instructions for attaching rubber footpads and placing the switch on a desk safely.
Ensure grounded AC outlet, adequate ventilation, and avoid heavy items on top of the switch.
Guidance on installing the switch in a standard 19-inch rack using provided brackets.
Details the power receptacle on the rear panel for connecting the power cord.
Explains the function of Power, 1000Mbps Link/Act, and 10/100Mbps Link/Act LEDs.
Steps to check power cord connection and power source if the Power LED is not lit.
Troubleshooting steps for Link/Act LEDs, including cable connection, device status, and cable length.
To Next Page
