EasyManua.ls Logo

TP-Link TL-SG1005LP User Manual

TP-Link TL-SG1005LP
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Connection
© 2020 TP-Link 7106508668 REV2.0.0
Installation Guide
5-Port Gigabit Desktop PoE Switch
LED Explanation
Note: For simplicity, we will take TL-SG1005P for example throughout this Guide.
Note: 1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. TL-SG1005LP can supply up to 30 W for each PoE port and 40 W for
all PoE ports.
3. TL-SG1005P can supply up to 30 W for each PoE port and 65 W for all
PoE ports.
DC Power Adapter
AC Power Cord
IP Camera AP IP Phone
PoE Devices
Router
LAN Port
WAN Port
Internet
Ethernet Ports (1-5)
PoE Ports (1-4)
Power
On: Power on
O: Power o
Power
PoE MAX
PoE Max
TL-SG1005LP
On: 33 W ≤ Total power supply < 40 W
Flashing: Total power supply ≥ 40 W
O: Total power supply < 33 W
TL-SG1005P
On: 58 W ≤ Total power supply < 65 W
Flashing: Total power supply ≥ 65 W
O: Total power supply < 58W
Link/Act and PoE Status
On: Providing PoE power
Flashing: Current-overload/Short-circuit
O: Not providing PoE power
On (Green): Connected to a 1000 Mbps
device
On (Yellow): Connected to a 10/100 Mbps
device
Flashing: Transmitting/receiving data
O: No device is connected to the
corresponding port.
Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-SG1005LP and is the answer not in the manual?

TP-Link TL-SG1005LP Specifications

General IconGeneral
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity5
10G supportNo
Auto-negotiationYes
Networking standardsIEEE 802.1p, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Cable types supportedCat3, Cat4, Cat5, Cat5e, Cat6
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
Maximum cable length100 m
Power sourceDC/PoE
Input current0.81 A
AC input voltage100 - 240 V
DC input voltage53.5 V
AC input frequency50/60 Hz
Power consumption (max)47.5 W
Total Power over Ethernet (PoE) budget40 W
Power over Ethernet plus (PoE+) ports quantity4
Jumbo frames16000
Forwarding rate7.44 Mpps
MAC address table2000 entries
Heat dissipation161.98 BTU/h
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Switch typeUnmanaged
CertificationFCC, CE, RoHS
Product colorBlack
Package typeBox
Package depth196 mm
Package width131 mm
Package height121 mm
Package weight730 g
Harmonized System (HS) code85176990
Sustainability certificatesCE, Federal Communications Commission (FCC), RoHS
Weight and Dimensions IconWeight and Dimensions
Depth98 mm
Width99.8 mm
Height25 mm

Summary

LED Indicators and PoE Information

Power and Link/Act Status

Explains the meaning of Power, Link/Act, and PoE status LEDs on the switch.

PoE Maximum Power Budgets

Details the PoE power output limits for TL-SG1005LP and TL-SG1005P models.

General Specifications

Technical Specifications Overview

Lists standards, protocols, interfaces, media, capacity, and power supply details.

Environmental and Physical Specifications

Operating Conditions and Dimensions

Covers operating temperature, humidity, and mounting dimensions.

Frequently Asked Questions (FAQ)

Troubleshooting Common LED Issues

Addresses problems with Power LED, Link/Act LED, and PoE power supply.

FCC Compliance Information

FCC Statement for Digital Devices

Declares compliance with FCC rules for digital devices and potential interference.

Mounting Requirements

Wall Mounting Screw Specifications

Specifies the screw types and dimensions required for wall mounting the device.

Product Label Symbols Explanation

Symbol Definitions for Product Label

Explains the meaning of various symbols found on the product label, including voltage and recycling.

Related product manuals