Need help?Do you have a question about the TP-Link TL-SG1008D and is the answer not in the manual?
General| MAC address table | 8000 entries |
|---|---|
| Jumbo frames support | Yes |
| Maximum data transfer rate | 1 Gbit/s |
| Supported data transfer rates | 10/100/1000 Mbps |
| 10G support | No |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Input frequency | 50/60 Hz |
| Dimensions (WxDxH) | 165 x 108 x 28 mm |
| Power requirements | 100 - 240VAC |
| Connectivity technology | Wired |
| Switch type | Managed |
| Switch layer | - |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Certification | FCC, CE, RoHs |
| Product color | Black |
| LED indicators | LAN, Power, Y |
| Input current | 0.85 A |
| Input voltage | 9 V |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
Advises against using the product near water or during electrical storms due to safety risks.
Details the TL-SG1008D's Gigabit Ethernet technology and benefits for network speed.
Explains the terminology used in the User Guide for TL-SG1008D.
Lists compliance standards, port types, flow control, and architecture of the switch.
Steps for placing the switch on a flat desk, connecting the power adapter, and ensuring ventilation.
Describes the initialization process and LED indicator behavior when the switch is powered on.
Details the LEDs on the front panel, their status, and indications for power, link, and activity.
Describes the power socket and the 8 network ports on the rear of the switch.
Lists standards, topology, protocol, data transfer rates, network media, and port details.
Details dimensions, power supply, operating/storage temperature, and humidity.
Provides steps to check if the power LED is not lit, focusing on power source and connection.
Offers solutions for the Link/Act LED not lighting up, checking cable connections and device status.
To Next Page
