Need help?Do you have a question about the TP-Link TL-SG1024 and is the answer not in the manual?
General| Jumbo frames | 10000 |
|---|---|
| Forwarding rate | 35.7 Mpps |
| MAC address table | 8000 entries |
| Store-and-forward | Yes |
| Maximum data transfer rate | 1 Gbit/s |
| Supported data transfer rates | 10/100/1000 Mbps |
| 10G support | No |
| Networking standards | IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x |
| Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
| Connectivity technology | Wired |
| Dimensions (W x D x H) (imperial) | 17.3 x 7.1 x 1.7 \ |
| Switch type | Unmanaged |
| Supported network protocols | CSMA/CD, TCP/IP |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Stackable | - |
| Form factor | 1U |
| Certification | FCC, CE, RoHS |
| Product color | Black |
| Heat dissipation | 46.44 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 13.62 W |
| Package depth | 528 mm |
| Package width | 250 mm |
| Package height | 80 mm |
| Package weight | 2130 g |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 440 mm |
| Height | 44 mm |
Advises against using the product near water or during electrical storms to prevent electric shock.
Details the TL-SG1008/TL-SG1016/TL-SG1024 Gigabit Ethernet Switch and its benefits for network speed.
Lists the primary technical features, including standards compliance, auto-negotiation, and non-blocking architecture.
Guidance on placing the switch on a desk, ensuring proper ventilation and stable placement.
Steps for securing the switch in a standard 19-inch rack using the provided 'L' brackets.
Instructions for connecting power and initial system self-check indicated by LED behavior.
Details the layout of the front panel, including RJ-45 ports and LED status indicators.
Identifies the rear panel components, specifically the AC power receptacle.
Explains the meaning and behavior of the Power, 1000Mbps Link/Act, and 10/100Mbps Link/Act LEDs.
To Next Page
