To Next PageTo Next Page
Need help?Do you have a question about the TP-Link TL-SG105S and is the answer not in the manual?
General| 10G support | No |
|---|---|
| Auto MDI/MDI-X | Yes |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Stackable | - |
| Certification | CE, FCC, RoHS |
| Product color | Black |
| Housing material | Steel |
| Switch type | Unmanaged |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Package type | Box |
| Package depth | 125 mm |
| Package width | 128 mm |
| Package height | 92 mm |
| Cables included | AC |
| Power source | DC |
| Input voltage | 5 V |
| Output current | 0.6 A |
| Output voltage | 9 V |
| Power consumption (max) | 2.3 W |
| Jumbo frames | 16000 |
| Forwarding rate | 7.4 Mpps |
| MAC address table | 2000 entries |
| Packet buffer memory | 1 MB |
| Heat dissipation | 7.83 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 97.8 mm |
|---|---|
| Width | 99.8 mm |
| Height | 25 mm |
Explains the Power LED states: On for power on, Off for power off.
Details Link/Act LEDs for 1000M (Green) and 10/100M (Yellow) speeds and data activity.
Steps to check if the Power LED is not lit, including adapter connection and power source.
Checks for Link/Act LED issues, including cable connection, device status, and cable length.
Details standards, protocol, and data transfer rates for Ethernet, Fast Ethernet, and Gigabit Ethernet.
Specifies compatible network cable types (UTP, STP) and maximum lengths for different speeds.
Lists the RJ45 ports, LED indicators (Power, 10/100M, 1000M), and advanced features.
Details operating and storage temperature ranges and humidity levels for device performance.
Explanation of symbols on the product label, including DC voltage, indoor use, and recycling (WEEE).
Important safety guidelines regarding water, fire, humidity, disassembly, and charger usage.
FCC rules compliance for Class B digital devices to prevent radio interference.
Statement of compliance with essential requirements of EU directives for EMC, LVD, and RoHS.
Statement of compliance with Canadian ICES-3(B)/NMB-3(B) for digital devices.
