Need help?Do you have a question about the TP-Link TL-SG105 and is the answer not in the manual?
General| Jumbo frames | 16000 |
|---|---|
| Forwarding rate | 7.4 Mpps |
| MAC address table | 2000 entries |
| Jumbo frames support | Yes |
| Packet buffer memory | 1 MB |
| Maximum data transfer rate | 2 Gbit/s |
| Supported data transfer rates | 10/100/1000Mbps |
| 10G support | No |
| Networking standards | IEEE 802.1p, IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Switch type | Unmanaged |
| Power connector | DC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Switching protocols | CSMA/CD |
| Certification | CE, FCC, RoHS |
| Product color | Black |
| Rack mounting | - |
| Heat dissipation | 7.83 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Package type | Box |
| Package depth | 128 mm |
| Package width | 125 mm |
| Package height | 92 mm |
| Package weight | 370 g |
| Connectivity technology | Wired |
| Power source | DC |
| Input current | 0.6 A |
| Input voltage | 9 V |
| Power consumption (max) | 2.3 W |
Weight and Dimensions| Depth | 98 mm |
|---|---|
| Width | 100 mm |
| Height | 25 mm |
Explains the product's Gigabit Ethernet technology, speed, and architecture.
Lists core functionalities like Green Ethernet, Auto-MDI/MDIX, QoS, and Jumbo frames support.
Details the front panel layout, including ports and LED indicators for status.
Describes the rear panel components such as the Kensington security slot and power socket.
Step-by-step guide for positioning the switch on a flat surface.
Instructions for securely attaching the switch to a wall using mounting slots.
Explains how to power on the device and interpret the initial LED status indicators.
Covers standards, topology, protocol, data transfer rates, and port configurations.
Lists operating conditions including temperature and humidity ranges.
Provides steps to diagnose and fix issues with the power indicator light.
Offers solutions for when the Link/Act LED fails to illuminate for connections.
To Next Page
