TP-Link TL-SG105 Installation Guide

Installation Guide
© 2020 TP-Link
7106508660 REV6.0.0
5/8/16-Port Gigabit Desktop Switch
Note:
For simplicity, we will take TL-SG108 for example throughout this Guide.
On: Power on
O: Power o
LED Explanation
Power
Connection
Ethernet Ports (1-8)
PC PC
Router
LAN PortWAN Port
Internet
TL-SG108
Power Adapter
Link/Act
1000M (Green)
On: Running at 1000 Mbps
10/100M (Yellow)
On: Running at 10/100 Mbps
Link/Act (For TL-SG116)
Flashing: Transmitting/receiving data
Link/Act (For TL-SG105/TL-SG105S/TL-SG108/TL-SG108S)
Link/Act (Green)
Running at 10/100/1000 Mbps
O:
Flashing: Transmitting/receiving data
No device is linked to the
corresponding port
On:
Flashing: Transmitting/receiving data

TP-Link TL-SG105 Specifications

General

Jumbo frames	16000
Forwarding rate	7.4 Mpps
MAC address table	2000 entries
Jumbo frames support	Yes
Packet buffer memory	1 MB
Maximum data transfer rate	2 Gbit/s
Supported data transfer rates	10/100/1000Mbps
10G support	No
Networking standards	IEEE 802.1p, IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Switch type	Unmanaged
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	5
Switching protocols	CSMA/CD
Certification	CE, FCC, RoHS
Product color	Black
Rack mounting	-
Heat dissipation	7.83 BTU/h
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Package type	Box
Package depth	128 mm
Package width	125 mm
Package height	92 mm
Package weight	370 g
Connectivity technology	Wired
Power source	DC
Input current	0.6 A
Input voltage	9 V
Power consumption (max)	2.3 W

Weight and Dimensions

Depth	98 mm
Width	100 mm
Height	25 mm