TP-Link TL-SG105PP-M2 User Manual

Installation Guide
© 2023 TP-Link
7106510264 REV1.0.0
2.5G Multi-Gigabit Desktop PoE++ Switch
Panel Explanation
Connection
Power LED
Power Adapter
Ethernet Ports (1-5)
Router
LAN Port WAN Port
Internet
IP Camera AP IP Phone
PoE Ports (1-4)
PoE Devices
On: Power on
O: Power o
Link/Act and PoE Status LEDs
On:
Providing PoE power
O:
Not providing PoE power
On (Green):
Running at 2.5 Gbps
On (Yellow):
Running at 1000/100 Mbps
Flashing:
Transmitting or receiving data
O:
No device connected
On: 116 W ≤ Total power supply < 123 W
Flashing: Total power supply ≥ 123 W
O: Total power supply < 116 W
PoE Max LED
Recovery Switch
On: The switch will constantly detect
the working status of a PoE
powered device (PD). When the
switch nds that the PD works
abnormally, the switch will reboot it.
O: The PoE Auto Recovery function is
disabled.
Note:
1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. TL-SG105PP-M2 can supply up to 60 W for each PoE port and 123 W for all PoE ports.

TP-Link TL-SG105PP-M2 Specifications

General

Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	5
Power source	DC/PoE
Input current	2.43 A
Input voltage	53.5 V
AC input voltage	220 V
AC input frequency	50 Hz
Power supply included	Yes
Power consumption (max)	143.37 W
Number of power supply units	1
Heat dissipation	488.89 BTU/h
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
10G support	No
Networking standards	IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Cable types supported	Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Forwarding rate	18.6 Mpps
MAC address table	4000 entries
Package type	Box
Cables included	AC
Switch type	Unmanaged
Switch layer	-
Certification	CE, FCC, RoHS
Product color	Black
Housing material	Steel
Total Power over Ethernet (PoE) budget	123 W
Power over Ethernet (PoE) power per port	60 W
Power over Ethernet 4PPoE (PoE++) ports quantity	4

Weight and Dimensions

Depth	126 mm
Width	209 mm
Height	26 mm

Summary

Panel Explanation

Power LED Status

Details the states of the Power LED indicator on the switch, indicating power status.

POE Max LED Indicator

Describes the POE Max LED states related to total power supply consumption and limits.

Recovery Switch Function

Explains the function of the Recovery Switch for PoE Auto Recovery status detection.

Link/Act and PoE Status LEDs

Details Link/Act status (speed, data activity) and PoE status (power provision).

Connection Diagram

PoE Ports and Devices

Illustrates the physical PoE ports (1-4) and examples of connected PoE devices.

Ethernet Ports and Network Setup

Shows Ethernet ports (1-5), power adapter, router, and internet connections.

PoE Connection Notes

Provides notes on PoE port functionality and total power supply capacity.

Product Specifications

General Specifications

Lists the general technical specifications of the 2.5G Multi-Gigabit Desktop PoE++ Switch.

Environmental and Physical Specs

Details the operating and storage environmental conditions and physical attributes.

Frequently Asked Questions

Power LED Troubleshooting

Troubleshooting steps for when the Power LED on the switch is not illuminated.

Link/Act LED Not Lit

Troubleshooting guide for Link/Act LED not lighting up despite a connected device.

PoE Ports Not Supplying Power

Explains reasons for PoE ports not supplying power, including overload scenarios.

PoE Auto Recovery Precautions

Advises on precautions before using the PoE Auto Recovery feature to prevent device issues.

Declarations of Conformity

EU Declaration of Conformity

Confirms the device's compliance with essential EU requirements and directives.

UK Declaration of Conformity

Provides the UK declaration of conformity for the device's compliance with UK regulations.