Need help?Do you have a question about the TP-Link TL-SG1024DE V7 and is the answer not in the manual?
General| Model | TL-SG1024DE V7 |
|---|---|
| Ports | 24 x 10/100/1000 Mbps RJ45 ports |
| Switching Capacity | 48 Gbps |
| MAC Address Table | 8K |
| Jumbo Frame | 9 KB |
| Power Supply | 100-240V AC, 50/60 Hz |
| Fanless | Yes |
| Packet Forwarding Rate | 35.7 Mpps |
| Mounting | Rack Mountable |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
| Dimensions | 440 x 180 x 44 mm |
| Standards and Protocols | IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x |
| Power Consumption | 13.1 W |
Steps to install the device on a desktop surface using rubber feet.
Instructions for mounting the device in a rack using provided brackets and screws.
Guide on connecting the switch to a computer using an RJ45 Ethernet cable.
Explanation of how to connect SFP modules for enhanced connectivity.
Method for connecting the switch's console port to a computer for CLI management.
Procedure for connecting the device to a power source using the provided cord.
Steps to configure the switch via a web browser using its IP address.
Guidance on managing switches centrally via a Controller application.
Instructions for managing the switch through the Command Line Interface.
Steps to manage Easy Smart Switches using a dedicated configuration utility.
To Next Page