English
3
■
Console Port
For switches with the console port, you can connect the console
port with your computer by the console cable. Then you can load
the CLI to manage the switch.
■
Power On
Plug the female connector of the provided power cord into the
power socket of the device, and the male connector into a power
outlet.
Configuration
(Unavailable for Unmanaged Switches)
■
Configure the Switch Using the GUI
1. Set the IP address of your PC in the same subnet of the
switch. The IP address is 192.168.0.x ("x" is any number from
2 to 254); the Subnet Mask is 255.255.255.0.
2. Open a web browser and type the default management
address http://192.168.0.1 in the address field of the browser,
then press the Enter key.
3. Enter admin for the default User Name and Password, both in
To Next Page
Loading...
