English
2
3. After the brackets are attached to the device, use suitable
screws (not provided) to secure the brackets to the rack.
Rack
Connection
■
Ethernet Port
Connect an Ethernet port of the switch to the computer by RJ45
cable as the following figure shown.
RJ45 Cable
■
SFP Port
For switches with SFP ports, you can connect a SFP port to a SFP
module. If an SFP transceiver is installed in a slot and has a valid
link on the port, the associated RJ45 port will be disabled and
cannot be used.
SFP Port
SFP Module
To Next Page
Loading...
