English
1
Installation
■
Desktop Installation
To install the device on the desktop, please follow the steps
below:
1. Set the device on a flat surface strong enough to support the
entire weight of the device with all fittings.
2. Remove the adhesive backing papers from the rubber feet.
3. Turnover the device and attach the supplied rubber feet
to the recessed areas on the bottom at each corner of the
device.
Feet
■
Rack Installation
To install the device in a rack, follow the instructions described
below:
1. Check the grounding and stability of the rack.
2. Secure the supplied rack-mounting brackets to each side of
the device with supplied screws.
Rackmounting
Bracket
Bottom of the Device
Notch
Screw
To Next Page
Loading...
