TP-Link M5350 - Close Cover and Turn On Device

M5350
3G Mobile Wi-Fi User Guide
-6-

Note:
It‟s advised that you do not use M5350 until the battery has been installed.
When finishing the above two-step installation, you can press the power button for about
5 seconds to turn on M5350.
 Tips:
You are supported to charge the battery in two ways:
Method 1:
1) Connect one end of the USB cable to the micro USB port.
2) Connect the other end of the USB cable to the USB port of the power adapter.
3) Plug the power adapter to a standard wall socket.
Method 2:
1) Connect one end of the USB cable to the micro USB port.
2) Connect the other end of the USB cable to the USB port of your PC.