Need help?Do you have a question about the TP-Link AC2600 MU-MIMO and is the answer not in the manual?
General| Frequency Band | 2.4GHz and 5GHz |
|---|---|
| MU-MIMO | Yes |
| Maximum Wireless Speed | 2600 Mbps |
| Antennas | 4 external antennas |
| Processor | 1.4 GHz dual-core processor |
| Beamforming | Yes |
| Wireless Standard | IEEE 802.11ac/n/a 5 GHz, IEEE 802.11b/g/n 2.4 GHz |
| WiFi Speeds | 800 Mbps (2.4 GHz) + 1733 Mbps (5 GHz) |
| WiFi Range | 3-4 Bedroom Houses |
| Ethernet Ports | 4 Gigabit LAN ports |
| WAN Port | 1 Gigabit WAN port |
| USB Ports | 1 USB 3.0 port, 1 USB 2.0 port |
| Security | WPA, WPA2 |
Step-by-step instructions for connecting the router to the modem and power supply.
How to access and log into the router's web management interface using a browser.
Guides users through an automated setup process for internet connection.
Instructions for manually configuring internet connection types like Dynamic IP, Static IP, PPPoE.
Procedures to set up the router to extend wireless coverage as an access point.
How to block content, set daily time limits, and schedule internet access.
Configuring SPI Firewall and DoS Protection against cyber threats.
Blocking or allowing specific devices by MAC address using Blacklist/Whitelist.
Binding IP to MAC addresses to prevent ARP spoofing and attacks.
Steps to set up and use OpenVPN for secure remote access to the home network.
Instructions for setting up PPTP VPN for remote access, including client configuration.
Instructions for performing online or local firmware upgrades for the router.
Saving, restoring router configurations, and performing factory resets.
Troubleshooting steps when the internet connection fails after setup.
Steps to resolve issues with detecting or connecting to the wireless network.
To Next Page
