Name: TP-Link AC2600 MU-MIMO
Brand: TP-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 14

Manage the Router

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to Advanced > System Tools > Administration and enable Remote Management.

3. Enable Remote Management via HTTPS as needed.

4. Enter the port number to be used to access the router with greater security between

1024 and 65535. The default port number for HTTP is 80 and 443 for HTTPs.

5. If you want a specific device to be allowed to access the router remotely, select Only

the Following IP/MAC Address and enter a valid local IP address or MAC address of

the device. If you want all devices to be allowed to access the router remotely, select

All.

6. Click Save and now you can remotely access and manage the router via the displayed

address.

14. 9. System Log

When the router does not work normally, you can save the system log and send it to the

technical support for troubleshooting.

• To save the system log in local:

1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the

router.

2. Go to Advanced > System Tools > System Log.

3. Choose the type and level of the system logs as needed.

Questions and Answers:

Need help?

Do you have a question about the TP-Link AC2600 MU-MIMO and is the answer not in the manual?

TP-Link AC2600 MU-MIMO Specifications

General