Install the SIM Card and Battery
Connect to the Internet
1 Press and hold the button until the welcome screen appears.
· A nano SIM card must
be converted using the
provided SIM card tray.
·
The micro SD card slot
can be used for storage
and media sharing.
·
The SIM card and SD
card are not provided.
!
2 You will nd the following messages on the screen, and then follow the instructions to connect to the Mobile Wi-Fi.
To power o, press and hold the button
until the “Power O” message appears on the screen.
· If other messages display on the screen, please refer to FAQ > Q3.
· By default, Power Saving is enabled and the Wi-Fi will be turned o when no wireless devices are connected to the Mobile Wi-Fi for 10 minutes.
Press the or button to resume the Wi-Fi connection.
!
!
Enjoy!
Press the button twice and then press
the button to select Device Info. Use the
SSID and Password shown on the screen to
connect to your Mobile Wi-Fi.
SSID: TP-Link_XXXX
Password: XXXXXXXX
Login Address:
http://tplinkmi.net
Device Info
Wi-Fi
Wi-Fi
TP-Link_XXXX
CHOOSE A NETWORK...
Other...
< Settings
Quick Installation Guide
LTE-Advanced Mobile Wi-Fi
0MB
0.0K/S
Carrier Name
5 Replace the cover.
SIM
a
b
1 Remove the back cover. 2 Slide and lift up the SIM card slot cover. 3 Insert the SIM card and slide the cover back to lock.
4 Install the provided battery.