TP-Link Omada ER8411 - Appendix A: Troubleshooting; Changing WAN;LAN Port Modes; Connecting to a Modem Router

Omada VPN Router
14Appendix A Troubleshooting
Appendix A Troubleshooting
Q1. What should I do if I want to change the mode of the WAN/LAN ports?
1. Recommended) Refer to the Interface Description table of this guide for the default mode of the
WAN/LAN ports.
2.
C
onnect a computer to a LAN port of this router. If your computer is configured with a fixed IP
address, change it to Obtain an IP address automatically.
3.
L
og in to this router’s management page at 192.168.0.1. Go to Network > WAN > WAN Mode,
change the mode of the WAN/LAN ports by ticking the checkboxes, and click Save.
Q2. What should I do if I need to connect this router to a modem router?
Check the LAN IP address of the modem router first. If the LAN IP address of the modem router
is 192.168.0.1, which is the same as the default LAN IP address of this router, follow the steps to
change the LAN IP address of this router:
1. Connect a computer to a LAN port of this router. If your computer is configured with a fixed IP
address, change it to Obtain an IP address automatically.
2.
L
og in to this router’s management page at 192.168.0.1, and go to Network > LAN > LAN. In the
Network List section, change the IP address 192.168.0.1 to 192.168.1.1, and click OK.