©2021 TP-Link
7106509307 REV3.2.1
Plug the extender into a power outlet next to your router. Wait until its
Power LED turns solid on.
Power On
1
3
Set Up
2
Quick Installation Guide
Wi-Fi Range Extender
Solid On
Next to
Relocate
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the Signal LED turns solid blue. If it doesn't,
relocate the extender closer to the router to achieve better signal quality.
Tip: For more intuitive location assistant, access extender settings via the Tether app and go to Tools > Location Assistant.
Router Devices
Halfway
Blue: Suitable location
Red: Too far from router
Solid On
Setup with videos
Scan QR code or visit
https://www.tp-link.com/support/setup-video/#range-extenders
and search for the setup video of your model.
1. Get the up-to-date Tether app from the
Apple App Store or Google Play, or simply
scan the QR code.
Tether
Scan for Tether
or
Via the Tether App
Note: If you cannot nd your device, please refer to
FAQ > Q1.
Note: If the LED does not turn solid on, please refer to
FAQ > Q2.
4. Follow app instructions to complete the setup.
The Signal LED should turn solid on, indicating
successful connection to your router.
2. Launch the Tether app and log in with your
TP-Link ID. If you don’t have an account,
create one rst.
Welcome to Tether
Log In
TP-Link ID (Email)
Password
3. Tap the button and select Range Extender.
My Devices
No devices found.
Choose your device type
Gaming Router
Range Extender
Router
1. Press the WPS button on your router.
2. Within 2 minutes, press the WPS button on the
extender for 1 second. The Signal LED should
change from blinking to solid on, indicating
successful connection.
3. If the extender connects to a dual-band router,
repeat steps 1 and 2 to connect to the other
band.
For more details, please refer to the user guide at
https://www.tp-link.com/support/download.
1. Connect your computer or smartphone to the
extender’s network TP-Link_Extender.
2. Visit http://tplinkrepeater.net or
http://192.168.0.254 in a web browser.
Create a password to log in.
3. Follow web instructions to complete the setup.
Extended Network Names:
Router’s network name with
_EXT
at the end
or
Same as your OneMesh router
(See back for OneMesh details)
Passwords:
Same as your router
Via a Web Browser
Via the WPS Button
More Setup Methods
Enjoy!
Connect your devices to the extender wirelessly or via an Ethernet cable,
then enjoy the internet. The password of your extended network is the
same as your host router.
Tip: You can also set up the extender in Access Point mode to transform your existing wired network
to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support/download.
Note: For safety, only plug the extender in the direction as shown below.
To Next Page
Need help?
General
Weight and Dimensions
