What to do if I forget my TP-Link RE210 password?
If you forget your password for the TP-Link Extender, you can restore the Range Extender’s configuration to its factory default settings. Alternatively, try using the default user name and password: admin, admin. If that doesn't work, try to reconfigure your Range Extender.
How to reset TP-Link RE210 to factory settings?
To restore your TP-Link Range Extender’s configuration to its factory default settings, press the Reset button on the side panel for 5 seconds before releasing it. Alternatively, log in to the web-based management page of RE210, then go to “System Tools -> Factory Defaults” and click “Restore.”
What to do if I cannot access TP-Link RE210 Extender configuration page?
If you cannot access the web-based configuration page for your TP-Link Extender, first check to verify all the connections (either wireless or wired ones) are proper. Then, try to obtain an IP address and gateway. If problems persist, reset the device, and then use the default IP address to get into the web-based configuration page and reconfigure the device.
Why is TP-Link RE210 Extender wireless speed slow?
The wireless transmission rate speed decreases while the wireless signal is stronger after repeated by RE210 because Range Extender devices are set to work in half-duplex instead of full-duplex mode, in compliance with the wireless transmission protocol. TP-LINK recommends that you connect to the Range Extender when your home network connection is poor, or when you want a larger wireless coverage to eliminate “dead zones.”
Items included in the product package.
Explains terminology and notation used in the guide.
Detailed description of the RE210's purpose, capabilities, and key functionalities.
Visual identification of the device, its ports, and LED indicators.
Preliminary information, requirements, and connecting the device.
How to access the utility and scan for wireless networks.
Setting up wireless bands and finalizing the quick setup.
Viewing device status and initiating the quick setup wizard.
Customizing LAN, DHCP, and client list settings.
Managing Wi-Fi network names, security, and filtering.
Fine-tuning wireless parameters and monitoring transmission.
Utilities for firmware, passwords, logs, and device reboot.
Methods to reset the device and recover forgotten passwords.
Troubleshooting steps for issues accessing the management page.
General| Wi-Fi | Yes |
|---|---|
| WLAN data transfer rates supported | 1, 6, 11, 54, 108, 270, 300 Mbit/s |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 1 |
| Data network | Not supported |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Operating frequency | 2400 & 5000 MHz |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK |
| Networking standards | IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
| Wi-Fi data rate (max) | 750 Mbit/s |
| Product color | White |
| Power consumption | 6000 mA |
| Power consumption (typical) | 6.5 W |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Type | Network repeater |
| Maximum transfer distance | - m |
| Certification | CE, FCC |
| Sustainability certificates | RoHS |
| Antenna type | Internal |
| Antennas quantity | 2 |
| Cables included | LAN (RJ-45) |
Weight and Dimensions| Depth | 89 mm |
|---|---|
| Width | 100.5 mm |
| Height | 155.5 mm |
To Next Page
