Need help?Do you have a question about the TP-Link RE700X and is the answer not in the manual?
General| Antenna type | Internal |
|---|---|
| Product type | Mesh router |
| Reset button | Yes |
| Certification | CE, RoHS |
| Product color | White |
| LED indicators | Power, Status |
| Transmit power | CE: 2.4GHz ≤16dBm, 5GHz ≤21dBm dBmW |
| Antennas quantity | 2 |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
| Top Wi-Fi standard | Wi-Fi 6 (802.11ax) |
| Security algorithms | WEP, WPA, WPA2, WPA3 |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| WLAN data transfer rate (first band) | 574 Mbit/s |
| WLAN data transfer rate (second band) | 2402 Mbit/s |
| Ethernet LAN (RJ-45) ports | 1 |
| Power consumption (typical) | 11.2 W |
| Number of products included | 1 pc(s) |
Weight and Dimensions| Depth | 36 mm |
|---|---|
| Width | 78 mm |
| Height | 149 mm |
Describes the meaning of different LED indicators for status.
Instructions for plugging in and powering on the extender.
Step-by-step guide to setup using the mobile app.
Guide for configuring the extender through a web interface.
Instructions for WPS setup for quick connection.
Steps to extend existing networks or change wireless settings.
Configuring rules to permit or block specific devices.
Guide on configuring the extender for Access Point mode.
Instructions for updating the extender's firmware for new features.
To Next Page
