TP-Link RE210 User Manual

RE210
AC750 Wi-Fi Range Extender User Guide
5
 Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0
or above.
 Operating temperature of the Range Extender should be 0℃~40℃ (32℉~104℉).
 Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing).
2.3 Connecting the Device
Figure 2-1 Typical connection of RE210
To establish a typical connection of the Range Extender, please take the following steps:
1. Connect the Cable/DSL modem to a Wireless router with an Ethernet cable.
2. Plug your RE210 directly to a standard electrical wall socket, which is near the Wireless router.
3. Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to RE210 wirelessly.
Or you can connect your PC to the sole LAN port of Range Extender via an Ethernet cable.
4. Log in the web-based management page of RE210 and complete the configurations.
(Please refer to Chapter 3 Quick Installation Guide or Chapter 4 Configure the Device
for the
configurations, as you need.) Through the web page configuration you can successfully
connect
RE210 to the wireless router.
5. Adjust an ideal location for RE210. (Please refer to Section 2.1 Before You Begin
for detailed
information about ideal location.)

TP-Link RE210 Specifications

General

Wi-Fi	Yes
WLAN data transfer rates supported	1, 6, 11, 54, 108, 270, 300 Mbit/s
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	1
Data network	Not supported
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Operating frequency	2400 & 5000 MHz
Security algorithms	128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK
Networking standards	IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Wi-Fi data rate (max)	750 Mbit/s
Product color	White
Power consumption	6000 mA
Power consumption (typical)	6.5 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Type	Network repeater
Maximum transfer distance	- m
Certification	CE, FCC
Sustainability certificates	RoHS
Antenna type	Internal
Antennas quantity	2
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	89 mm
Width	100.5 mm
Height	155.5 mm