TP-Link RE210 - Advanced Wireless and Statistics

RE210
AC750 Wi-Fi Range Extender User Guide
20
4.4.5 High Speed
Selecting Wireless > High Speed allows you to configure the wireless mode for your device
(show in Figure 4-15).
Figure 4-15 High Speed
 Concurrent-Dual Band Range Extender – Extends both 2.4GHz and 5GHz bands for the
router.
 High Speed Mode – Boost the WiFi speed but only one band could be extended.
 High Speed Mode 1 – Connect to the router on 2.4GHz only and connect to the WiFi
clients on 5GHz only;
 High Speed Mode 2 – Connect to the router on 5GHz only and Extend to the WiFi clients
on 2.4GHz only.
4.4.6 Wireless Statistics
Selecting Wireless > Wireless Statistics will allow you to see the wireless transmission
information in the following screen shown in Figure 4-16.
Figure 4-16 Wireless Statistics
 MAC Address - Shows the connected wireless station's MAC address.
 Current Status - The connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected.
 Received Packets - packets received by the station.
 Sent Packets - packets sent by the station.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click the Refresh button.