TP-Link RE365 V1 User Manual

Wi-Fi
Wi-Fi
TP-Link_Extender
CHOOSE A NETWORK...
Other...
< Settings
Safety Information
• Keep the device away from water, re, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but
devices of the same or another type not be stacked in normal use. Do not plug in a row.
• Plug the product into the wall outlets with earthing connection through the plug.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca
If you need more setup help, please visit
https://www.tp-link.com/support/faq/3074/, or simply scan the QR code.
For technical support, replacement services, user manuals and other information,
please visit https://www.tp-link.com/support, or simply scan the QR code.
To communicate with TP-Link users or engineers, please join the TP-Link Community
at https://community.tp-link.com.
AC1200 Wi-Fi Range Extender with AC Passthrough Model: RE365
Method 2: Via a Web BrowserMethod 1: Via the Tether App
1. Connect your smartphone to the extender‘s or router’s network.
2. Launch the Tether app, select your extender, and log in.
3. View or change extender settings as needed.
Access Extender Settings
After setup, you can access extender settings via any of the methods below. You can reselect main network, change extended network settings and more.
Note: If your extender and router use the same network name, Method 1 is recommended.
Stable wireless performance and wired connection with a main router required.
To change your extender to Access Point Mode, do the following:
b. By Tether: Login to your extender → Find the Operation Mode
Access Point Mode (AP Mode)
a. By Web: Login → Find the change mode button on top.
For details, refer to the user guide at https://www.tp-link.com/support.
*Due to Tether app updates, images
may differ from your actual interface.
Network
Operation Mode
More
1. Connect your computer or smartphone to the extender’s network . If you are using a
computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://www.tplinkrepeater.net in the address bar, and log in.
3. View or change extender settings as needed.
EasyMesh-Compatible
You can experience strong, stable, and seamless wireless connections
throughout your home with EasyMesh, a whole home mesh standard that works
across dierent access points for ultimate exibility.
Seamless Roaming
Connects mobile devices to your routers or extenders that provide the best coverage. Devices
compatible with EasyMesh also share a single Wi-Fi name so you stay connected in every room.
One-Click Settings
Press the WPS button on the main router and the extender within 2 minutes of each other,
then the EasyMesh network will set up.
Flexible Scalability
Flexibly scale your home networking with dierent vendors,* dierent topologies, dierent
Protocols and dierent product categories.
For more information, visit
https://www.tp-link.com/easymesh/.
Scan for Setup Video
*TP-Link EasyMesh-compatible products can network with other devices that use EasyMesh.
Failed connections may be due to rmware conicts of dierent vendors. The
EasyMesh-Compatible function is still being developed on some models and will be supported
in subsequent software updates.
This product is compatible with standardized EasyMesh technology but has not obtained the
Wi-Fi EasyMesh
TM
certication.
INTERNET
SAME
Network Name & Password
for seamless roaming
If you are still having problems, contact our technical support.
Q3. How do I reset the extender?
With the extender powered on, press the RESET button for 1 second. The extender will reboot.
Q1. What should I do if the Tether app cannot nd my device during setup?
Try another method by following the steps below:
1. Connect your smartphone to the extender’s network TP-Link_Extender.
2. Launch the Tether app, and select your extender.
Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, try turning
off your cellular data.
3. Follow app instructions to complete the setup.
If you are still having problems, contact our technical support.
Q2. What should I do if the LED doesn’t turn solid on after completing
setup via the Tether app or web browser?
You may have entered incorrect Wi-Fi passwords for your main router during the
conguration. Check the passwords and try again.
Make sure the extender is close to your router, preferably within 16 feet, and away from large
electrical appliances.
If you have enabled wireless MAC ltering, wireless access control, or access control list
(ACL) on your router, disable them rst, then follow any method on the front page to
complete the conguration.
Try setting it up via the WPS button.
Reset the extender and go through the conguration again.
My Devices
Local Device
RE365
XX-XX-XX-X X-XX-X X
Change Mode
Log Out
TP-Link ID
English
Note: If you are using a mobile device, method b is recommended.
LED Explanation
LED Status Indication (For Range Extender Mode)
The extender is not connected to either the 2.4 GHz or 5 GHz
wireless network of your router.
2.4G
/5G
On
The extender is on or o.
The system is starting up or rmware upgrade is in progress.
On/O
Blinking
The extender is connected to your router’s wireless network and is in a
suitable location.
The extender is receiving a weak signal. Try relocating it closer to your
router.
WPS connection is in progress.
No wireless connection is established.
(Signal)
Solid green
Solid yellow
Blinking
O
(Power)
The extender is connected to the 2.4 GHz and/or 5 GHz wireless
network of your router.
O

TP-Link RE365 V1 Specifications

General

Frequency Band	2.4GHz and 5GHz
Wi-Fi Speed	AC1200
Button	WPS Button, Reset Button
Operating Temperature	0°C~40°C (32°F~104°F)
Operating Humidity	10%~90% non-condensing
Certifications	CE, FCC, RoHS
Wi-Fi Technology	802.11ac
Wireless Speed	300 Mbps (2.4 GHz) + 867 Mbps (5 GHz)
Ethernet Port	1 x 10/100 Mbps
Wireless Security	64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
LED Indicators	Power, Ethernet
Antenna Type	2 external antennas