Quick Installation Guide
RE380D
©2015 TP-LINK 7106505742 REV1.0.0
Configure
Relocate
Enjoy!
AC1200 Wi-Fi Range Extender
Both extended networks share the same Wi-Fi password as your host network, but may have different wireless network names if you customize the names
during the configuration.
Ideal Extender Placement
Host Network
Extended Network
Plug in the extender halfway between your router (Host Network) and
the Wi-Fi dead zone.
Wait for the extender to reconnect and the LED turns solid blue.
If not, relocate it closer to the router to achieve a good (or better)
signal quality.
Option ONE
Using your Web Browser
Power on
Plug the extender’s adapter into an electrical outlet
near your router. Then turn on the extender and
wait until the Power LED is lit and solid blue.
or
Disconnect the Ethernet (wired) connection to your
computer. Click the Wi-Fi icon on the taskbar and
connect to the extender’s network (e.g.
TP-LINK_Extender_2.4G or _5GHz).
Connect automatically Connect
TP-LINK_Extender_2.4/5GHz
√
via Wireless
Connect to the Extender
1. Disconnect the wireless connection to your computer.
2. Connect the extender to your computer via an Ethernet cable.
via Ethernet Cable
1
2
Region
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
Extended 2.4GHz SSID:
Your network name
Copy Host SSID
Hide SSID broadcast
The extended 2.4GHz password is the same as your Host password.
Extended 5GHz SSID:
Your network name_5G
Copy Host SSID
Hide SSID broadcast
The extended 5GHz password is the same as your Host password.
Back Next
Either copy the host's SSIDs or customize them
for extended 2.4GHz and 5GHz network, then
click Next.
Per FCC regulations, all Wi-Fi products markerted
in the U.S. are fixed to the U.S. region.
Select your country/region, then click Next.
3
If you want to connect the extender only to the
router’s 5GHz wireless network, please click Skip.
Select your router's 2.4GHz host network and enter
the password, then click Next.
Next
Please select 2.4GHz host network or skip this network.
SSID Signal
MAC Address
Security
Your router’s wireless name
30:B5:C1:33:99:76
Host 2.4GHz Password:
TP-LINK_123456
23:B5:C0:30:90:06
Back Other... Rescan Skip
Region
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
12345678
4
If your router does not support 5GHz wireless
network, please click Skip to continue.
Select your router's 5GHz host network and enter
the password, then click Next.
5
6
http://tplinkrepeater.net
admin
admin
Login
Launch a web browser and type
http://tplinkrepeater.net in the address field
and use admin (all lowercase) for both
Username and Password to log in.
If the login window does not pop up,
please refer to the FAQ > Q1.
Create a new username and password to
log in the web management page, then click
Confirm.
1
2
For more information, please visit our website http://www.tp-link.com
Verify your wireless settings and click Finish.
And then check the corresponding LED(s).
7
(2.4GHz) (5GHz)
Solid on Solid on
Option ONE: Using your Web Browser
To Next Page
Need help?
General
