TP-Link Tapo C400S2 - Mount Your Camera; Step 1: Drill Holes; Step 2: Install the Bracket; Step 3: Mount Camera

12
Mount Your Camera
When you nish adding your camera in the Tapo app, you can place your camera on a at surface, or mount it on a wall or ceiling with the provided
mounting template and screws.
Step 1. Drill Holes
Stick the mounting template to the desired
mounting place. Drill 3 screw holes according
to the template.
Step 2. Install the Bracket
Insert three anchors into the holes and use the
screws to ax the bracket over the anchors.
Step 3. Mount Camera
Install the camera to the mounting bracket,
and adjust the camera angle.
Size of Screws
1.8±0.1
30±0.5
3.5±0.1