EasyManua.ls Logo

TP-Link tapo D230S1 - Installation Tips

TP-Link tapo D230S1
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Installation Tips
Before you install the doorbell, read the installation tips below.
1. Install the doorbell on a at wall.
2. The doorbell should be placed 1.2 m (4 ft) above the ground.
3. Use the included 15° mounting wedge for a more focused view from a specic side.
4. Avoid placing the doorbell close to a side wall in the eld of view. If you must, use the mounting wedge to adjust the viewing angle to reduce reected
light from the wall for better night vision performance.
Without
Mounting Wedge
With
Mounting Wedge
15°
With
Mounting Wedge
(Flip 180°)
15°