TP-Link TL-ER6120 - Page 45

45
Step 4:
Enter Account Name and Password whatever you like, here we use “client” as account name,
password is “123456”.
Step 5:
Under Tunnel, select Client-to-LAN.
Step 6:
The tunnel supports up to 10 connections, we enter 5 in this example.
Step 7:
Under IP Address Pool, select “group” we have added before.
Step 8:
Look for Status, select Active.
Click on
Save
Click on
Add
Enter
Account
Name and
Password
DNS setting is not necessary, it can be kept as default