d. Click save and next
e. Change the Wireless Network Name/SSID to a name of your choosing
f. Enter a Wireless Password
g. Click next
h. Click Finish (If you are connected over wireless, you will need to reconnect to
the new SSID to proceed)
4. Administrative Setup
a. Go to Network
, Lan
, and set IP address to: 192.168.64.1 (router will reboot on
Save)
b. Go to System Tools
, Password
and set a new password for the admin user to
C0nnect0r(or a password of your choice. Keep a record of this password
for future reference)
5. DHCP Setup [optional]
a. Click on DHCP
(left hand side tab)
b. In DHCP settings, set:
- Primary DNS
to: 8.8.8.8
- Secondary DNS
to: 8.8.4.4
6. This completes the configuration process.
-END-
To Previous Page
Loading...
