TL-PA8030P AV1200 3-Port Gigabit Passthrough Powerline Adapter
7
3． Plug the powerline adapter into a wall socket next to the computer.
4． Turn on your computer.
5． Check and confirm that the Power LED
, Ethernet LED , and Powerline LED on the
powerline adapter are ON.
The hardware connection mechanism is shown below:
Note:
Where the MAINS plug or an appliance coupler is used as the disconnected device, the disconnected
device shall remain readily operable. The idle wall sockets or electrical outlets in your household
electrical circuit can be used normally without interference from the network.
To Next Page
Loading...
