TP-Link TL-POE200 - CE Mark Warning; SAFETY NOTICES

English
1
PoE Splitter Only
The PoE Splitter can be used with a PoE/PoE+ switch to deliver direct current (DC) power and data to a Non-PoE
device.
PoE Injector Only
The PoE Injector supplies steady power and data connectivity to a powered device through an Ethernet cable.
PoE Injector
Power Socket
Non-PoE Device
(switch, router, etc.)
IP Camera
AP
IP Phone
Powered Device (PD)
PoE Injector
LAN IN
PWR
DC 48V
PoE Injector
Power Socket
Non-PoE Device
(switch, router, etc.)
IP Camera
AP
IP Phone
Powered Device (PD)
PoE Injector
LAN IN
PWR
DC 48V
Non-PoE Device
(suggested power:＜10W)
PoE/PoE+ Switch
PoE Splitter
Set the required voltage
of the non-PoE device
before cable connection.
12V 9V 5V
LAN OUT
PWR
DC OUT
PoE Splitter