Need help?Do you have a question about the TP-Link TL-SC2020 and is the answer not in the manual?
General| Model | TL-SC2020 |
|---|---|
| Category | Security Camera |
| Type | IP Camera |
| Resolution | 1280 x 720 |
| Digital Zoom | 4x |
| Minimum Illumination | 0.5 Lux |
| Night Vision | Yes |
| Audio Input | Built-in microphone |
| Audio Output | Built-in speaker |
| Wireless Standards | IEEE 802.11 b/g/n |
| Wireless Security | WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
| Power Supply | 5V DC |
| Storage | Micro SD card slot (up to 32GB) |
| Compatibility | Windows, Mac, iOS, Android |
| Video Compression | H.264 |
| Frame Rate | 30 fps |
| Image Sensor | 1/4" CMOS |
| Lens | f=3.6mm, F=2.0 |
| Audio | Two-Way |
| Connectivity | Wireless |
| Protocols | TCP/IP, HTTP, DHCP, DNS |
| Interface | RJ-45 for Ethernet |
| Operating Humidity | 10% to 85% non-condensing |
Covers legal warnings, product integrity, accessory use, and general safety adherence for user protection.
Guidelines for operating conditions, handling malfunctions, safe transportation, proper ventilation, and cleaning procedures.
Lists the minimum hardware and software requirements for the PC to properly operate the network camera.
Details the various features and capabilities of the TL-SC2020 Wired Network Camera.
Guides users through the physical connection of the camera to the network and power.
Explains how to find the camera's IP address using the Intelligent IP Installer utility.
Details how to access and control the camera's web interface using a Windows browser.
Provides access to core configuration menus like Account, Network, Image, Video, Audio, Camera Settings, and Events.
Provides options to reboot, reset to factory defaults, backup/restore settings, and upgrade firmware/language packs.
To Next Page
