Need help?Do you have a question about the TP-Link TL-SC3230N and is the answer not in the manual?
General| Resolution | 1280 x 720 |
|---|---|
| Night Vision | Yes |
| Connectivity | Wired/Wireless |
| Wireless Standard | IEEE 802.11b/g/n |
| Audio Compression | G.711 |
| Audio Input | Built-in Microphone |
| Alarm Trigger | Motion detection |
| Power over Ethernet | No |
| Lens | f=3.6mm, F=2.0 |
| Minimum Illumination | 0.5 Lux |
| Ethernet | 10/100Mbps |
| Wireless Security | WEP/WPA/WPA2 |
| Frame Rate | Up to 30fps |
| Video Compression | H.264 |
| Notification Method | Email, FTP |
| Protocols | TCP/IP, HTTP, DHCP, DNS, RTP/RTSP, PPPoE, SMTP, NTP, UPnP, DDNS |
Instructions on attaching the camera to its included stand for mounting.
Guidance on placing the camera on a table or mounting it to a ceiling or wall.
Details on connecting the camera to the network using an Ethernet cable.
Instructions for connecting the 12VDC power adapter to the camera and a power outlet.
Guides on using IP Search for camera discovery, viewing, and configuring LAN/Wireless settings.
Guides on accessing the camera from the Internet via a NAT router, including fixed IP and port forwarding.
Step-by-step guide to accessing the camera's interface using Internet Explorer and installing ActiveX.
Guides on starting, stopping, and saving video recordings to the local PC in ASF format.
Guides on configuring network settings like DHCP, DDNS, 3GPP, PPPoE, and UPnP for camera connectivity.
Details Ethernet connection settings, including MAC address, DHCP, IP, DNS, and HTTP port.
Explains how to configure wireless settings for the camera, including SSID, security, and IP assignment.
Explains how to set up Dynamic DNS for remote access, especially for dynamic IP addresses.
Guides on configuring PPPoE settings for direct connection to xDSL or broadband networks.
Covers system settings, date & time, maintenance, and log viewing for camera management.
Covers factory defaults, backup/restore settings, and firmware upgrades for the camera.
Manages user accounts (Administrator/Viewer), including adding, modifying, or deleting them.
Configures motion detection windows, object size, and sensitivity for event triggering.
Specifies schedules for event triggers and activates actions like sending notifications or recording.
Defines event/schedule types, enable times, trigger sources, and associated actions.
To Next Page
