point (You will be prompted to push the button on the window if WPS function is supported
as shown in the figure below). If the network to be connected is not secure, the connection
will be built without entering a key.
Figure 3-20
3. You have now successfully connected to the network.
Figure 3-21
3.3.2 In Windows 8
Windows 8 users may use the built-in wireless utility. Follow the steps below.
1. Click the icon
at the bottom of your screen, and a network list will appear at the right
side of your screen. Select your target network, and then click Connect.
19
To Next Page
Loading...
