Method 1: Plug and Play
Create a New Wireless Network
1� Write down the default wireless network name (SSID) and
password of TL-WPA4220�
Wireless Network Name (SSID)*:
TP-LINK_XXXXXX
Wireless Password:
XXXXXXXX
* The default SSID is TP-LINK_XXXXXX� (XXXXXX indicates the last six
unique characters of the WLAN MAC address�)
2� Connect your devices as follows�
AV500
All the Powerline LEDs will turn
solid within 1 minute�
Enjoy!
Use the default SSID (TP-LINK_
XXXXXX) and password you wrote
down to access the Internet�
SSID:
ABCDE
SSID:
TP-LINK_XXXXXX
TL-PA4010
LAN WAN
TL-WPA4220
Internet
If the Powerline LEDs don’t turn solid, reset all the powerline devices, or
create a powerline network by referring to FAQ-Q1.
To Next Page
Loading...
