TP-Link TL-WPA8730 KIT User Manual

WAN LAN
TL-WPA8730 KIT
Hello, I’m here.
Follow me to extend your Wi-Fi network.
Powerline
1
Internet
* Image may differ from
actual product.
Adapter TL-PA8010P Extender TL-WPA8730
2
Plug the powerline adapter into a wall outlet, then plug the
powerline extender near it.
Connect the adapter to a LAN
port of your router using an
Ethernet cable.
Find the Wi-Fi Info Card in the package, then relocate the powerline extender to a wall
outlet in the Wi-Fi “dead” zone
. Connect to the Wi-Fi using the SSID and password on the
card.
* A red Powerline LED indicates poor signal strength, move the extender to another wall outlet.
within 2 minutes
Tips:
You can add more powerline devices to the
existing powerline network by pairing these
devices.
* If the Power LED does not blink, press it again.
Press the Pair button for 1 second.
The Power LED starts blinking.
A.
Pair the powerline devices.
B.
Press the Pair button for 1 second.
The Power LED starts blinking.
When the Powerline LED is on
and stable, it’s done.
LED PairWi-Fi

TP-Link TL-WPA8730 KIT Specifications

General

Product Type	Powerline Wi-Fi Extender
Powerline Speed	Up to 1000 Mbps
Transmission Speeds (Ethernet)	10/100/1000 Mbps
Frequency Band	2.4 GHz and 5 GHz
Wi-Fi Standard	IEEE 802.11ac
Range	300 meters (Powerline)
Security	WPA/WPA2
Standards and Protocols	IEEE 802.3, IEEE 802.3u
Button	Pair Button
LED Indicator	Power, Ethernet, Wi-Fi
Compatibility	Compatible with all HomePlug AV2 and HomePlug AV standard powerline adapters
Wireless Standards	IEEE 802.11a/b/g/n/ac
Wireless Speeds	Up to 1200 Mbps (300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz)
Modulation Technology	OFDM
Operating Modes	Powerline Extender