TP-Link TL-WPA8630P Manual

Q1. How do I reset my powerline extender?
A. With the extender powered on, use a pin to press and hold the Reset button until all LEDs turn off. When all LEDs start on
again, the reset process is complete.
Q2. How to troubleshoot if there is no Internet connection in my powerline network?
A1. Make sure all adapters and extenders are on the same electrical circuit.
A2. Make sure all Powerline LEDs are on. If not, pair your adapters and extenders again.
A3. Make sure all hardware connections are correctly and securely connected.
A4. Check if you have an Internet connection by connecting the computer directly to the modem or router.
Q3. What can I do if a successfully-paired extender does not reconnect after being relocated?
A1. Make sure all powerline devices are on the same electrical circuit.
A2. Pair it again with another adapter or extender, and make sure the Powerline LED is on before relocating it.
A3. Check for possible interference, such as washers, air conditioners or other household appliances that may be too close to
one of the powerline adapters or extenders.
Plug it into the integrated electrical socket to remove some electrical noise.
Frequently Asked Questions
For passthrough powerline devices
Attention
©2015 TP-LINK 7106505866 REV1.0.0
Wall Outlet Power Strip
Copy Wireless Settings from Router to Extender Item Legend
Note: The wireless settings can also be configured
through the powerline extender's web interface
or through the tpPLC app. You can download the
app from the App Store or Google Play, or simply
scan the QR code. To learn more information, visit
www.tp-link.com.
2. Within 2 minutes, press the Wi-Fi button for 1
second.
WPSWAN LAN
WPS
WAN LAN
If your router supports WPS, you can follow the steps below to automatically copy the router's wireless
settings (SSID and password) to the powerline extender.
1. Plug in the powerline extender near your
router. Press the WPS button on your router.
e
b
c
d
Pair Button:
Press to pair powerline devices. Refer to Step 3 on the front
page for instruction.
Press for about 8 seconds until the Powerline LED is off
to leave the powerline network.
e
Integrated Electrical Socket:
Used as a pass-through AC outlet to power other devices.
Its built-in noise filter also reduces some electrical noise
that may interfere with powerline performance.
a
LED Button:
Press to turn all LEDs on or off.
b
Reset Button:
Press for at least 5 seconds until all LEDs are off and then on
again to reset the powerline extender to factory defaults.
c
Wi-Fi Button:
Press to copy the wireless settings from the router to the
powerline extender.
Press for at least 5 seconds to turn Wi-Fi on or off.
d
3. When the 2.4GHz Wi-Fi LED and 5GHz Wi-Fi
LED blink quickly for 3 seconds, and then
stay on, it’s done!
* The powerline extender copies by default both 2.4GHz and 5GHz
wireless settings at the same time. If it fails to copy both, your
router may be only able to clone one band at a time. Please
check your router manual for support.
a

TP-Link TL-WPA8630P Specifications

General

Modulation	OFDM
Power plug	Type F
Ethernet LAN	Yes
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), Wi-Fi 4 (802.11n)
PowerLine standard	HomePlug AV2
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Security algorithms	128-bit AES
Networking standards	IEEE 1901, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	3
Maximum data transfer rate	1300 Mbit/s
Maximum operating distance	300 m
Ethernet LAN interface type	Gigabit Ethernet
Power consumption (standby)	7 W
Power consumption (typical)	11 W
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Package type	Box
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	75 mm
Width	42 mm
Height	152 mm