10
Chapter 2
Initial Use
b . (Within two minutes) press the Pair button of the powerline extender for 1 second.
The Power LED should start blinking. When the extender’s Powerline LED
turns
on, the pairing process is done!
Powerline Extender
TL-WPA8631P
within 2 minutes
Powerline Adapter
(For demonstration only)
Blinking
Blinking
On
5. Relocate the new extender to the Wi-Fi “dead” zone. Connect your devices to the
internet using the SSIDs (network name) and password printed on the label at the
side of the extender.
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
Done!
Now enjoy the internet with the SSIDs and password printed on the label!
To Next Page
Loading...
