TP-Link TL-WPA8635P - Page 15

12
Chapter 2
Initial Use
within 2 minutes
Existing
Powerline Device
New Powerline Extender
TL-WPA8631P
Blinking
Blinking
On
4. Relocate the new extender to the Wi-Fi “dead” zone.
A . Use the SSIDs (network name) and password on the label at the side of the new
extender to connect to the internet.
B . Use the SSID (network name) and password of your existing wireless network to
connect.
Done!
Enjoy the internet through your extended network!