TP-Link TL-WR1043ND MultiWAN www.sharedband.com
Sharedband Router Setup Steps
1) Remove the Sharedband router from its packaging (DO NOT remove the protective film from the router for
the first 30 days) and place the router in a suitable location
2) Use the included yellow Ethernet cables to connect the router’s yellow ‘Ethernet’ ports to the
modems/routers provided by your ISP. Please note that the number of the Ethernet interface that the
Modem/Router is connected to will correspond to the Ethernet WAN connection interface number displayed
within the GUI of the router
4) Use the included power adapter to connect router’s ’Power’ socket to a mains power outlet
5) Ensure that the ‘On/Off’ button is depressed
To Next Page
Loading...
