Need help?Do you have a question about the TP-Link TL-WR1042ND and is the answer not in the manual?
General| VPN support | PPTP, L2TP, IPSec (ESP Head) |
|---|---|
| Ethernet LAN | Yes |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| Rack mounting | No |
| Frequency range | 2.4 - 2.4835 GHz |
| USB ports quantity | 1 |
| Filtering description | IP, MAC, URL |
| WLAN data transfer rates supported | 11, 54, 300 Mbit/s |
| Ethernet LAN (RJ-45) ports | 4 |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Antennas quantity | 2 |
| Antenna connector type | RP-SMA |
| Antenna gain level (max) | 3 dBi |
| Certification | CE, FCC, RoHS |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product color | Black, White |
Weight and Dimensions| Depth | 140 mm |
|---|---|
| Width | 200 mm |
| Height | 28 mm |
| Weight | - g |
Guides users through the rapid setup process for the router.
Guides users through the rapid setup process for the router.
Configures Wide Area Network, Local Area Network, and MAC address settings.
Configures wireless network parameters, security, and filtering options.
Manages DHCP server, client lists, and address reservation for LAN devices.
Manages port forwarding, DMZ, and UPnP for network services.
Configures firewall, VPN passthrough, DoS protection, and access management.
Manages internet access policies based on hosts, targets, and schedules.
To Next Page
