EasyManua.ls Logo

TP-Link TL-WR1042ND - 4.7 USB Settings

TP-Link TL-WR1042ND
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR1042ND 300Mbps Wireless N Gigabit Router
Click the Enable/ Disabled All button to make all entries enabled/disabled
Click the Delete All button to delete all entries
Click the Next button to go to the next page and Click the Previous button to return to the
previous page.
4.8 USB Settings
Figure 4-30 The USB Settings menu
There are five submenus under the USB Settings menu (shown in Figure 4-30): Storage Sharing,
FTP Server, Media Server, Print Server and User Accounts. Click any of them, and you will be
able to configure the corresponding function.
4.8.1 Storage Sharing
Choose menu “USB SettingsStorage Sharing”, and then you can configure a USB disk drive
attached to the router on this page as shown in Figure 4-31.
Figure 4-31 Storage Sharing
¾ Service Status - Indicates the Storage Sharing service's current status, started or stopped.
You can click the Start button to start the Storage Sharing service and click the Stop button
to stop it.
¾ Volume - The volume name of the USB drive the users have access to.
¾ Capacity - The storage capacity of the USB driver.
¾ Used - The used space of the USB driver.
-44-

Table of Contents

Other manuals for TP-Link TL-WR1042ND

Related product manuals